SINOMEMB®Brackish water SNBW-FR Series Fouling Resistant RO membrane elements
SINOMEMB® series fouling resistant (SNBW-FR) membrane elements are made of fouling resistant membrane and widened feed conduit (34mil-56mil, customized according to customer's working conditions). The membrane surface is more smooth and hydrophilic, and the membrane charge is closer to electric neutral, which can destroy the foundation of fouling and organic pollution blockage.The membrane element has stronger ability to resist inorganic salt scaling and colloid and organic pollution, which greatly improves the cleaning and recovery performance of the membrane, broadens the application field of the membrane element and to the greatest extent prolongs the service life of the membrane element.The system can still maintain a low pressure drop,high durability, high removal rate and high water yield even under high pollution conditions,make this series of Brackish water RO membrane elements superior throughout its life cycle.
3.1Brief introduction
SINOMEMB® series fouling resistant membrane elements (SNBW-FR) are suitable for water supply with salt content below 10,000 PPM and strict pretreatment but still containing organic pollutants in the water.Due to the smooth surface of the membrane, good hydrophilicity, close to electric neutrality, and widened water supply conduit, greatly reduce the adsorption and accumulation of bacteria and microorganisms on the membrane surface, so that it not only has strong the feature fouling resistant, but also has effective recovery after chemical cleaning.It is widely used in urban sewage and industrial waste water regeneration, desalting of slightly polluted surface water and recycling of cooling circulating waste water.
3.2 Specifications and main performance
| Model |
Effective membrane area ft2(m2) |
GPD(m3/d) |
Stable desalination
rate (%)
|
Min desalination rate (%) |
| SNBW-8040-FR280/56 |
280(26) |
7500(28.4) |
99.3 |
99.1 |
| SNBW-8040-FR330/48 |
330(30.7) |
8500(32.2) |
99.3 |
99.1 |
| SNBW-8040-FR365/36 |
365(33.9) |
9500(36.0) |
99.5 |
99.3 |
| SNBW-8040-FR400/34 |
400(37.2) |
10500(39.7) |
99.5 |
99.3 |
| SNBW-4040-FR |
90(8.4) |
2200(8.3) |
99.5 |
99.3 |
3.3 Test condition
Test pressure.....................................................................225psi (1.55Mpa)
Test liquid temperature.................................................................25℃
ppm(NaCl).....................................................2000ppm
Test liquid PH value.............................................................7.5
Recovery rate of single memb....................................................15%
3.4Absolute Maximum Ratings
Max operating pressure........................................................... 600psi(4.14Mpa)
Maximum feed flow of 4 inch memb.............................................16gpm(3.6 m3/h)
Max feed flow of 8 inch memb............................................. 75gpm(17 m3/h)
Max feed temperature............................................................ 45℃
Max feed continuous operation temperature When PH > 10.............35℃
Max feed SDI15............................................................5
Influent free chlorine concentration.......................................................＜0.1ppm
PH range of feed water during continuous operation..........................................2～11
PH range of inflow during chemical cleaning(30 Min)............1～13
Max pressure drop of single memb.............................................15psi(0.1Mpa)
Q:How is SINOMEMB membrane different from others?
A:We offer value against your money, prices which are comparatively lower, performance equivalent
to best membranes available and with higher longevity.
Q:Are you a manufacturer?
A.Yes,we have been in providing the professional products in wire mesh field for more than 10 years.
Q:How about the delivery time?
A:Usually within7-10days,customized order may need longer time.
Il tuo messaggio deve contenere da 20 a 3000 caratteri!
