PVDF MBR Membrane with 23m2 Surface Area for Intermittent Permeate and Continuing Aeration in Waste Water Treatment

Name: PVDF MBR Membrane with 23m2 Surface Area for Intermittent Permeate and Continuing Aeration in Waste Water Treatment
Brand: Sinomemb Environment Technology (beijing) Co.,
SKU: SNU-HO-2-C1030
Price: 73.11 USD
Availability: InStock

Tous les produits

Membrane MBR
(47)

Membrane RO résidentiel
(32)

Membrane industrielle de RO
(12)

membrane d'ultra-filtration
(16)

Membrane de RO d'eau de mer
(15)

Feuille de membrane RO
(3)

Membrane de l'eau saumâtre
(4)

Membrane à basse pression
(8)

Membrane résistante à l'encrassement
(12)

Certificat

Je suis en ligne une discussion en ligne

PVDF MBR Membrane with 23m2 Surface Area for Intermittent Permeate and Continuing Aeration in Waste Water Treatment

Image Grand : PVDF MBR Membrane with 23m2 Surface Area for Intermittent Permeate and Continuing Aeration in Waste Water Treatment

Détails sur le produit:

Lieu d'origine:	CHINE
Nom de marque:	SINOMEMB
Certification:	NSF
Numéro de modèle:	SNU-HO-2-C1030

Conditions de paiement et expédition:

Quantité de commande min:	5
Détails d'emballage:	Emballage d'exportation standard

Contact

PVDF MBR Membrane with 23m2 Surface Area for Intermittent Permeate and Continuing Aeration in Waste Water Treatment

description de

Composants de base:	MBR	Nom de produit:	Membrane ultrafiltration en fibre creuse, système d'ultrafiltration, module de membrane UF à fib
Taille des pores:	personnalisé., De 1 μm à 0,05 μm, 0,01 milliron, 1,0 μm, 0,2 μm	Usage:	Traitement des eaux usées ,, filtre liquide, éliminer les bactéries, purification
Module:	Exciter	Taille nominale des pores:	00,03 μm
Taille:	250 × 1715 mm	Matériau membranaire:	PVDF
Surfaces:	23m2
Mettre en évidence:	23m2 Surface Area MBR Membrane , Intermittent Permeate PVDF Membrane , Continuing Aeration Hollow Fiber Ultrafiltration Membrane

UF System Safe and Stable Operation Guide for MBR Membrane Element Operation SNU-HO-2-C1030

Product Description

MBR MEMBRANE PVDF-8/PVDF-10/PVDF-15/PVDF-20
MBR Membrane membrane series: Designed for high pressure, high hydrophilia and high flux conditions with improved pollution resistance and extended lifespan.

Compact hollow fiber membrane design requires less space and simplifies installation

Ideal for municipal and industrial wastewater treatment applications

Effectively prevents SS leakage compared to traditional activated sludge sedimentation

Removes microorganisms including colibacillus and cryptosporidium from water output

Product Working Principle

List of a full MBR plant

MBR Process Flow Chart

Advantages of MBR System

MBR systems offer significant advantages over conventional biological systems including superior effluent quality, reduced space requirements, and simplified automation. Key benefits include:

Higher volumetric loading rates with lower hydraulic retention times

Compact footprint compared to conventional systems

Produces effluent with low concentrations of bacteria, TSS, BOD, and phosphorus

Facilitates high-level disinfection for surface discharge or reuse applications

Specification

Operation Conditions

Temperature	1-45℃
pH	2-13
Designed Permeate Flux	10-25LMH, 25℃
NACIO Cleaning Concentration	5000ppm
Back Wash Flux	30-50LMH, 25℃
Aeration Air	60-120Nm3/(h*m2)
Sludge Concentration	5000-10000ppm
Membrane Operation	Vacuum Sucion
Working Method	Working 8min, stop 2min
Transmembrane Pressure	≤60Kpa
Max Transmembrane Pressure	≤80Kpa
System Operation	Intermittent Permeate, Continuing Aeration
Clean Chemical	Citric Acid/NACIO
Cleaning Frequency	6-12 month
Permeate Turbidity	≤1 NTU
Outlet TSS	≤2 mg/l

Note: The actual permeate and back wash flux depends on the whole system's operation and maintenance. The output water parameter may vary slightly according to feed water conditions.

MBR Module

MBR Module Specifications

Model	MBR-50TPD	MBR-100TPD	MBR-150TPD
Capacity	50-75m3/D	100-150m3/D	150-200m3/D
Element Quantity	22 elements (10m2)	30 elements (15m2)	40 elements (15m2)
Membrane Area	220m2	450m2	600m2
Outlet Pipe	DN32	DN40	DN50
Inlet Air Pipe	DN40	DN50	DN80
Module Size LWH (mm)	18007601500	2400760400	30007601900
Approx. Weight	200KGS	400KGS	550KGS
Frame Structure Material	SS Pipe, PVC
Aeration (air-water ratio)	＞15:1

1. PVDF-10 or PVDF-15 membrane assemblies are taken as examples in the design table.
2. The size of the membrane module in the table is recommended data, which can be adjusted according to site conditions.
3. The water production values are recommendations for common sewage treatment conditions. Users should adjust according to actual conditions (COD, MLSS, Aeration rate, etc.).

UF Specifications and Models

Model	Membrane Material	Operation Mode	Membrane Element Size (mm)	Effective Membrane Area (m²)	Nominal Filter Pore Size (μm)
SNU-HI-1-C1030	PES	inside-out	Φ250×965	23	0.01

Produit Tag:

Personne à contacter: Mr. Gary Gao

Téléphone: +8618610069839

Autres Produits