PVDF UF Membrane with 51 m2 Surface Area and 0.03 μm Nominal Pore Size for Industrial Wastewater Treatment

Name: PVDF UF Membrane with 51 m2 Surface Area and 0.03 μm Nominal Pore Size for Industrial Wastewater Treatment
Brand: Sinomemb Environment Technology (beijing) Co.,
SKU: Snu-ho-2-kmp
Price: 73.11 USD
Availability: InStock

Tutti i prodotti

Membrana MBR
(47)

Membrana RO residenziale
(32)

Membrana industriale del RO
(12)

membrana di ultrafiltrazione
(16)

Membrana del RO dell'acqua di mare
(15)

Fogli di membrana RO
(3)

Membrana dell'acqua salata
(4)

Membrana a bassa pressione
(8)

Membrana resistente all'incrostazione
(12)

Certificazione

Porcellana Sinomemb Environment Technology (beijing) Co., Certificazioni

Sono ora online in chat

PVDF UF Membrane with 51 m2 Surface Area and 0.03 μm Nominal Pore Size for Industrial Wastewater Treatment

Grande immagine : PVDF UF Membrane with 51 m2 Surface Area and 0.03 μm Nominal Pore Size for Industrial Wastewater Treatment

Dettagli:

Luogo di origine:	Cina
Marca:	SINOMEMB
Certificazione:	NSF
Numero di modello:	Snu-ho-2-kmp

Termini di pagamento e spedizione:

Quantità di ordine minimo:	5
Imballaggi particolari:	Packaging di esportazione standard

Contatto

PVDF UF Membrane with 51 m2 Surface Area and 0.03 μm Nominal Pore Size for Industrial Wastewater Treatment

descrizione

Componenti principali:	MBR	Nome prodotto:	Membrana ultrafiltrazione in fibra cava
Dimensione dei pori:	personalizzato., Da 1μm a 0,05μm, 0,01micron, 1,0μm, 0,2μm	Utilizzo:	Trattamento delle acque reflue, filtro liquido, rimuovere i batteri, purificazione
Modulo:	Out-Inside	Dimensione nominale dei pori:	00,03 μm
Misurare:	220 × 2060mm	Materiale a membrana:	Pvdf
Superficie:	51 m2
Evidenziare:	51 m2 Surface Area PVDF UF Membrane , 0.03 μm Nominal Pore Size PVDF UF Membrane , 220×2060mm Size PVDF UF Membrane

MBR Membrane for Long-Lasting and Low Maintenance Industrial Wastewater Treatment

Product Features

The Canpure curtain type membrane module adopts a full-open design to prevent polluting dead angles and is particularly advantageous in large-scale systems with strengths such as strong adaptability to membrane water, high packing density, and small floor space.

Complex Thermally Induced Phase Separation (c-TIPS) PVDF UF Membrane

Patented technology

Canpure PVDF membrane is made by Canpure's patented c-TIPS technology. It has capillary strength higher than PVDF membrane prepared by NIPS Method and much better filtration grade than PVDF membrane prepared by conventional TIPS Method.

Permanent Hydrophilic Property

Patented technology

During the preparation of Canpure PVDF membrane, hydrophilic substances are added and special cross-linking technique is applied, endowing the permanent hydrophilic property of the capillary, more stable product water flux, improved anti-fouling property and better cleaning recovery.

High Anti-oxidation Performance

Canpure PVDF membrane has high crystallinity, can tolerate oxidant with higher concentration, and thus can achieve more profound cleaning effect and longer life.

Double-end Water Production

Permeate water is produced from both the lower and upper ends in Canpure Membrane Modules. This offers larger flux and more even distribution of fouling load than traditional single-end water production mode, and also effectively reduces the TMP and prolongs the operation cycle.

Soft Potting

Patented technology

The soft potting technique initiated by Canpure realizes the flexible connection between the "root" of the capillaries and the soft layer of the potting material, and prevents the break of the root of the capillaries.

UF Specifications and Models

Model	Membrane Material	Operation Mode	Membrane Element Size (mm)	Effective Membrane Area (㎡)	Nominal Filter Pore Size (μm)
SNU-HO-2-KMP	PVDF	outside-in	Φ220×2060	51	0.03
SNU-HO-2-D2020AN	PVDF	outside-in	Φ216×2160	72	0.01

Prodotto Tag:

Persona di contatto: Mr. Gary Gao

Telefono: +8618610069839

Altri prodotti