High Toughness PES MBR Membrane 46m2 Surface Area 225×1708mm Polyacrylonitrile Membrane

Name: High Toughness PES MBR Membrane 46m2 Surface Area 225×1708mm Polyacrylonitrile Membrane
Brand: Sinomemb Environment Technology (beijing) Co.,
SKU: SNU-HI-1-H60
Price: 73.11 USD
Availability: InStock

Όλα τα Προϊόντα

Μεμβράνη MBR
(47)

Μεμβράνη RO για κατοικίες
(32)

Βιομηχανική μεμβράνη RO
(12)

ultrafiltration μεμβράνη
(16)

Μεμβράνη νερού της θάλασσας RO
(15)

Πίνακας μεμβράνης RO
(3)

Μεμβράνη αλμυρού νερού
(4)

Μεμβράνη Χαμηλής Πίεσης
(8)

Μεμβράνη ανθεκτική στη ρύπανση
(12)

Πιστοποίηση

Κίνα Sinomemb Environment Technology (beijing) Co., Πιστοποιήσεις

Είμαι Online Chat Now

High Toughness PES MBR Membrane 46m2 Surface Area 225×1708mm Polyacrylonitrile Membrane

Μεγάλες Εικόνας : High Toughness PES MBR Membrane 46m2 Surface Area 225×1708mm Polyacrylonitrile Membrane

Λεπτομέρειες:

Τόπος καταγωγής:	ΚΙΝΑ
Μάρκα:	SINOMEMB
Πιστοποίηση:	NSF
Αριθμό μοντέλου:	SNU-HI-1-H60

Πληρωμής & Αποστολής Όροι:

Ποσότητα παραγγελίας min:	5
Συσκευασία λεπτομέρειες:	Τυπική συσκευασία εξαγωγής

Επικοινωνία

High Toughness PES MBR Membrane 46m2 Surface Area 225×1708mm Polyacrylonitrile Membrane

περιγραφή

Βασικά στοιχεία:	MBR	Όνομα προϊόντος:	Μεμβράνη υπερδιήθησης κοίλων ινών, σύστημα υπερδιήθησης, μονάδα μεμβράνης UF Hollow Fiber PVC Hollow
Μέγεθος πόρων:	Προσαρμοσμένο., από 1μm έως 0,05μm, 0,01micron, 1,0 μm, 0,2 μm	Χρήση:	Επεξεργασία λυμάτων ,, φίλτρο υγρού, αφαιρέστε βακτηρίδια, καθαρισμός
Μονάδα μέτρησης:	Εξαντλημένος	Ονομαστικό μέγεθος πόρων:	0,01μm
Μέγεθος:	225 × 1708mm	Υλικό μεμβράνης:	Κάλυμμα
Περιοχή επιφάνειας:	46m22
Επισημαίνω:	High Toughness MBR Membrane , 46m2 MBR Membrane , 225×1708mm Polyacrylonitrile Membrane

Normal Operation and Maintenance for MBR Membrane Element Size SNU-HI-1-H60

SNU-HM Hollow Fiber Submerged Curtain UF

The SNU-HM type hollow fiber submerged curtain UF utilizes special patented spinning technology with reinforced lining, combining all advantages of PVDF material membrane filaments with enhanced strength and toughness. This innovation addresses traditional PVDF membrane weaknesses of low strength and fragility, making it ideal for high-intensity aeration environments in MBR processes. With design flux optimized for different water qualities, its online cleaning cycle typically ranges between 7 to 17 days.

Membrane Element Specifications and Performance

Model	SNU-HM-Ⅰ	SNU-HM-Ⅱ
Specifications (mm)	630150036	630200036
Membrane diameter (mm)	1.5/2.6	0.8/1.4
Effective membrane area (㎡)	15	20
Filtration precision (μm)	0.05
Membrane material	Modified PVDF (polyvinylidene fluoride) and PET (polyester) support tubes
Connecting pipe specification	Φ32
Water collection method	Water catchment at both ends
Filter method	Submerged Suction Filtration
PH value	2-12
Temperature (°C)	10-45
Oil content (ppm)	<3
Transmembrane pressure TMP (Mpa)	0.02-0.05
Backwash pressure (Mpa)	0.1
Aeration rate (m³/h)	Air-water ratio 15:1-20:1
Backwash water flux (L/㎡·h)	25-50	25-36
Collecting pipe center distance (mm)	1500
Sludge concentration (ppm)	4000-12000	3000-10000
Design flux (L/㎡·h)	15-25	12-18
Product water quality	Turbidity≤0.2NTU, SDI≤3
Service life	≥3 years under standard conditions

Operation Guide

During UF system operation, avoid sudden pressure changes during startup, shutdown, or maintenance to prevent membrane damage. The product has been pre-treated with anti-corrosion and membrane wire protection. For initial operation, set water production rate to 50% of design capacity and discharge initial production.

Product Usage Tips

Proper system startup and maintenance are crucial for long-term performance. Verify all valves, instruments, pre-treatment equipment, and power systems meet design specifications before operation. Refer to technical manuals for system testing and debugging procedures.

Disclaimer: Failure to follow specified operating limits voids warranty. For inactive systems, inject protective liquid into membrane modules to prevent microbial growth and increased maintenance costs.

UF Specifications and Models

Model	Membrane Material	Operation Mode	Membrane Element Size (mm)	Effective Membrane Area (㎡)	Nominal Filter Pore Size (μm)
SNU-HI-1-H60	PES	inside-out	Φ225*1708	46	0.01

Note: Custom element models (membrane performance, appearance size) available based on order quantity.

ετικέτα:

Υπεύθυνος Επικοινωνίας: Mr. Gary Gao

Τηλ.:: +8618610069839

Άλλα προϊόντα