High Toughness PES MBR Membrane 46m2 Surface Area 225×1708mm Polyacrylonitrile Membrane

Name: High Toughness PES MBR Membrane 46m2 Surface Area 225×1708mm Polyacrylonitrile Membrane
Brand: Sinomemb Environment Technology (beijing) Co.,
SKU: Snu-Hi-1-H60
Price: 73.11 USD
Availability: InStock

모든 제품

MBR막
(47)

주거용 RO 멤브레인
(32)

산업적 수신 전용 얇은막
(12)

한외 여과막
(16)

해수 수신 전용 얇은막
(15)

RO 막판
(3)

염기성 물막
(4)

저압 멤브레인
(8)

오염 방지 멤브레인
(12)

인증

제가 지금 온라인 채팅 해요

High Toughness PES MBR Membrane 46m2 Surface Area 225×1708mm Polyacrylonitrile Membrane

큰 이미지 : High Toughness PES MBR Membrane 46m2 Surface Area 225×1708mm Polyacrylonitrile Membrane

제품 상세 정보:

원래 장소:	중국
브랜드 이름:	SINOMEMB
인증:	NSF
모델 번호:	Snu-Hi-1-H60

결제 및 배송 조건:

최소 주문 수량:	5
포장 세부 사항:	표준 수출 포장

접촉

High Toughness PES MBR Membrane 46m2 Surface Area 225×1708mm Polyacrylonitrile Membrane

설명

핵심 구성 요소:	MBR	제품명:	중공 광섬유 한외 여과막, Ultrafiltration System, PVC 중공 섬유 UF 막 모듈
기공 크기:	맞춤형., 1μm 내지 0.05μm, 0.01micron, 1.0μm, 0.2μm	용법:	폐수 처리, 액체 필터, 박테리아 제거, 정제
기준 치수:	아웃 사이드	공칭 기공 크기:	0.01μm
크기:	225 × 1708mm	막 재료:	PES
표면적:	46m2
강조하다:	High Toughness MBR Membrane , 46m2 MBR Membrane , 225×1708mm Polyacrylonitrile Membrane

Normal Operation and Maintenance for MBR Membrane Element Size SNU-HI-1-H60

SNU-HM Hollow Fiber Submerged Curtain UF

The SNU-HM type hollow fiber submerged curtain UF utilizes special patented spinning technology with reinforced lining, combining all advantages of PVDF material membrane filaments with enhanced strength and toughness. This innovation addresses traditional PVDF membrane weaknesses of low strength and fragility, making it ideal for high-intensity aeration environments in MBR processes. With design flux optimized for different water qualities, its online cleaning cycle typically ranges between 7 to 17 days.

Membrane Element Specifications and Performance

Model	SNU-HM-Ⅰ	SNU-HM-Ⅱ
Specifications (mm)	630150036	630200036
Membrane diameter (mm)	1.5/2.6	0.8/1.4
Effective membrane area (㎡)	15	20
Filtration precision (μm)	0.05
Membrane material	Modified PVDF (polyvinylidene fluoride) and PET (polyester) support tubes
Connecting pipe specification	Φ32
Water collection method	Water catchment at both ends
Filter method	Submerged Suction Filtration
PH value	2-12
Temperature (°C)	10-45
Oil content (ppm)	<3
Transmembrane pressure TMP (Mpa)	0.02-0.05
Backwash pressure (Mpa)	0.1
Aeration rate (m³/h)	Air-water ratio 15:1-20:1
Backwash water flux (L/㎡·h)	25-50	25-36
Collecting pipe center distance (mm)	1500
Sludge concentration (ppm)	4000-12000	3000-10000
Design flux (L/㎡·h)	15-25	12-18
Product water quality	Turbidity≤0.2NTU, SDI≤3
Service life	≥3 years under standard conditions

Operation Guide

During UF system operation, avoid sudden pressure changes during startup, shutdown, or maintenance to prevent membrane damage. The product has been pre-treated with anti-corrosion and membrane wire protection. For initial operation, set water production rate to 50% of design capacity and discharge initial production.

Product Usage Tips

Proper system startup and maintenance are crucial for long-term performance. Verify all valves, instruments, pre-treatment equipment, and power systems meet design specifications before operation. Refer to technical manuals for system testing and debugging procedures.

Disclaimer: Failure to follow specified operating limits voids warranty. For inactive systems, inject protective liquid into membrane modules to prevent microbial growth and increased maintenance costs.

UF Specifications and Models

Model	Membrane Material	Operation Mode	Membrane Element Size (mm)	Effective Membrane Area (㎡)	Nominal Filter Pore Size (μm)
SNU-HI-1-H60	PES	inside-out	Φ225*1708	46	0.01

Note: Custom element models (membrane performance, appearance size) available based on order quantity.

태그:

담당자: Mr. Gary Gao

전화 번호: +8618610069839

기타 제품