High Toughness PES MBR Membrane 46m2 Surface Area 225×1708mm Polyacrylonitrile Membrane

Name: High Toughness PES MBR Membrane 46m2 Surface Area 225×1708mm Polyacrylonitrile Membrane
Brand: Sinomemb Environment Technology (beijing) Co.,
SKU: Snu-HI-1-H60
Price: 73.11 USD
Availability: InStock

Tutti i prodotti

Membrana MBR
(47)

Membrana RO residenziale
(32)

Membrana industriale del RO
(12)

membrana di ultrafiltrazione
(16)

Membrana del RO dell'acqua di mare
(15)

Fogli di membrana RO
(3)

Membrana dell'acqua salata
(4)

Membrana a bassa pressione
(8)

Membrana resistente all'incrostazione
(12)

Certificazione

Porcellana Sinomemb Environment Technology (beijing) Co., Certificazioni

Sono ora online in chat

High Toughness PES MBR Membrane 46m2 Surface Area 225×1708mm Polyacrylonitrile Membrane

Grande immagine : High Toughness PES MBR Membrane 46m2 Surface Area 225×1708mm Polyacrylonitrile Membrane

Dettagli:

Luogo di origine:	Cina
Marca:	SINOMEMB
Certificazione:	NSF
Numero di modello:	Snu-HI-1-H60

Termini di pagamento e spedizione:

Quantità di ordine minimo:	5
Imballaggi particolari:	Packaging di esportazione standard

Contatto

High Toughness PES MBR Membrane 46m2 Surface Area 225×1708mm Polyacrylonitrile Membrane

descrizione

Componenti principali:	MBR	Nome del prodotto:	Membrana ultrafiltrazione in fibra cava
Dimensione dei pori:	personalizzato., Da 1μm a 0,05μm, 0,01micron, 1,0μm, 0,2μm	Utilizzo:	Trattamento delle acque reflue, filtro liquido, rimuovere i batteri, purificazione
Modulo:	Out-Inside	Dimensione nominale dei pori:	0,01μm
Misurare:	225 × 1708mm	Materiale a membrana:	Pes
Superficie:	46m2
Evidenziare:	High Toughness MBR Membrane , 46m2 MBR Membrane , 225×1708mm Polyacrylonitrile Membrane

Normal Operation and Maintenance for MBR Membrane Element Size SNU-HI-1-H60

SNU-HM Hollow Fiber Submerged Curtain UF

The SNU-HM type hollow fiber submerged curtain UF utilizes special patented spinning technology with reinforced lining, combining all advantages of PVDF material membrane filaments with enhanced strength and toughness. This innovation addresses traditional PVDF membrane weaknesses of low strength and fragility, making it ideal for high-intensity aeration environments in MBR processes. With design flux optimized for different water qualities, its online cleaning cycle typically ranges between 7 to 17 days.

Membrane Element Specifications and Performance

Model	SNU-HM-Ⅰ	SNU-HM-Ⅱ
Specifications (mm)	630150036	630200036
Membrane diameter (mm)	1.5/2.6	0.8/1.4
Effective membrane area (㎡)	15	20
Filtration precision (μm)	0.05
Membrane material	Modified PVDF (polyvinylidene fluoride) and PET (polyester) support tubes
Connecting pipe specification	Φ32
Water collection method	Water catchment at both ends
Filter method	Submerged Suction Filtration
PH value	2-12
Temperature (°C)	10-45
Oil content (ppm)	<3
Transmembrane pressure TMP (Mpa)	0.02-0.05
Backwash pressure (Mpa)	0.1
Aeration rate (m³/h)	Air-water ratio 15:1-20:1
Backwash water flux (L/㎡·h)	25-50	25-36
Collecting pipe center distance (mm)	1500
Sludge concentration (ppm)	4000-12000	3000-10000
Design flux (L/㎡·h)	15-25	12-18
Product water quality	Turbidity≤0.2NTU, SDI≤3
Service life	≥3 years under standard conditions

Operation Guide

During UF system operation, avoid sudden pressure changes during startup, shutdown, or maintenance to prevent membrane damage. The product has been pre-treated with anti-corrosion and membrane wire protection. For initial operation, set water production rate to 50% of design capacity and discharge initial production.

Product Usage Tips

Proper system startup and maintenance are crucial for long-term performance. Verify all valves, instruments, pre-treatment equipment, and power systems meet design specifications before operation. Refer to technical manuals for system testing and debugging procedures.

Disclaimer: Failure to follow specified operating limits voids warranty. For inactive systems, inject protective liquid into membrane modules to prevent microbial growth and increased maintenance costs.

UF Specifications and Models

Model	Membrane Material	Operation Mode	Membrane Element Size (mm)	Effective Membrane Area (㎡)	Nominal Filter Pore Size (μm)
SNU-HI-1-H60	PES	inside-out	Φ225*1708	46	0.01

Note: Custom element models (membrane performance, appearance size) available based on order quantity.

Prodotto Tag:

Persona di contatto: Mr. Gary Gao

Telefono: +8618610069839

Altri prodotti