High Toughness PES MBR Membrane 46m2 Surface Area 225×1708mm Polyacrylonitrile Membrane

Name: High Toughness PES MBR Membrane 46m2 Surface Area 225×1708mm Polyacrylonitrile Membrane
Brand: Sinomemb Environment Technology (beijing) Co.,
SKU: Snu-Hi-1-H60
Price: 73.11 USD
Availability: InStock

Tous les produits

Membrane MBR
(47)

Membrane RO résidentiel
(32)

Membrane industrielle de RO
(12)

membrane d'ultra-filtration
(16)

Membrane de RO d'eau de mer
(15)

Feuille de membrane RO
(3)

Membrane de l'eau saumâtre
(4)

Membrane à basse pression
(8)

Membrane résistante à l'encrassement
(12)

Certificat

Je suis en ligne une discussion en ligne

High Toughness PES MBR Membrane 46m2 Surface Area 225×1708mm Polyacrylonitrile Membrane

Image Grand : High Toughness PES MBR Membrane 46m2 Surface Area 225×1708mm Polyacrylonitrile Membrane

Détails sur le produit:

Lieu d'origine:	CHINE
Nom de marque:	SINOMEMB
Certification:	NSF
Numéro de modèle:	Snu-Hi-1-H60

Conditions de paiement et expédition:

Quantité de commande min:	5
Détails d'emballage:	Emballage d'exportation standard

Contact

High Toughness PES MBR Membrane 46m2 Surface Area 225×1708mm Polyacrylonitrile Membrane

description de

Composants de base:	MBR	Nom du produit:	Membrane ultrafiltration en fibre creuse, système d'ultrafiltration, module de membrane UF à fib
Taille des pores:	personnalisé., De 1 μm à 0,05 μm, 0,01 milliron, 1,0 μm, 0,2 μm	Usage:	Traitement des eaux usées ,, filtre liquide, éliminer les bactéries, purification
Module:	Exciter	Taille nominale des pores:	0,01 μm
Taille:	225 × 1708 mm	Matériau membranaire:	Pes
Surfaces:	46m2
Mettre en évidence:	High Toughness MBR Membrane , 46m2 MBR Membrane , 225×1708mm Polyacrylonitrile Membrane

Normal Operation and Maintenance for MBR Membrane Element Size SNU-HI-1-H60

SNU-HM Hollow Fiber Submerged Curtain UF

The SNU-HM type hollow fiber submerged curtain UF utilizes special patented spinning technology with reinforced lining, combining all advantages of PVDF material membrane filaments with enhanced strength and toughness. This innovation addresses traditional PVDF membrane weaknesses of low strength and fragility, making it ideal for high-intensity aeration environments in MBR processes. With design flux optimized for different water qualities, its online cleaning cycle typically ranges between 7 to 17 days.

Membrane Element Specifications and Performance

Model	SNU-HM-Ⅰ	SNU-HM-Ⅱ
Specifications (mm)	630150036	630200036
Membrane diameter (mm)	1.5/2.6	0.8/1.4
Effective membrane area (㎡)	15	20
Filtration precision (μm)	0.05
Membrane material	Modified PVDF (polyvinylidene fluoride) and PET (polyester) support tubes
Connecting pipe specification	Φ32
Water collection method	Water catchment at both ends
Filter method	Submerged Suction Filtration
PH value	2-12
Temperature (°C)	10-45
Oil content (ppm)	<3
Transmembrane pressure TMP (Mpa)	0.02-0.05
Backwash pressure (Mpa)	0.1
Aeration rate (m³/h)	Air-water ratio 15:1-20:1
Backwash water flux (L/㎡·h)	25-50	25-36
Collecting pipe center distance (mm)	1500
Sludge concentration (ppm)	4000-12000	3000-10000
Design flux (L/㎡·h)	15-25	12-18
Product water quality	Turbidity≤0.2NTU, SDI≤3
Service life	≥3 years under standard conditions

Operation Guide

During UF system operation, avoid sudden pressure changes during startup, shutdown, or maintenance to prevent membrane damage. The product has been pre-treated with anti-corrosion and membrane wire protection. For initial operation, set water production rate to 50% of design capacity and discharge initial production.

Product Usage Tips

Proper system startup and maintenance are crucial for long-term performance. Verify all valves, instruments, pre-treatment equipment, and power systems meet design specifications before operation. Refer to technical manuals for system testing and debugging procedures.

Disclaimer: Failure to follow specified operating limits voids warranty. For inactive systems, inject protective liquid into membrane modules to prevent microbial growth and increased maintenance costs.

UF Specifications and Models

Model	Membrane Material	Operation Mode	Membrane Element Size (mm)	Effective Membrane Area (㎡)	Nominal Filter Pore Size (μm)
SNU-HI-1-H60	PES	inside-out	Φ225*1708	46	0.01

Note: Custom element models (membrane performance, appearance size) available based on order quantity.

Produit Tag:

Personne à contacter: Mr. Gary Gao

Téléphone: +8618610069839

Autres Produits