High Toughness PES MBR Membrane 46m2 Surface Area 225×1708mm Polyacrylonitrile Membrane

Name: High Toughness PES MBR Membrane 46m2 Surface Area 225×1708mm Polyacrylonitrile Membrane
Brand: Sinomemb Environment Technology (beijing) Co.,
SKU: SNU-HI-1-H60
Price: 73.11 USD
Availability: InStock

Все продукты

Мембрана MBR
(47)

Мембрана RO для жилых помещений
(32)

Промышленная мембрана RO
(12)

мембрана ультрафильтрования
(16)

Мембрана RO морской воды
(15)

Площадь мембраны RO
(3)

Мембрана соленой воды
(4)

Мембрана низкого давления
(8)

Мембрана, устойчивая к загрязнению
(12)

Сертификация

Китай Sinomemb Environment Technology (beijing) Co., Сертификаты

Оставьте нам сообщение

High Toughness PES MBR Membrane 46m2 Surface Area 225×1708mm Polyacrylonitrile Membrane

Большие изображения : High Toughness PES MBR Membrane 46m2 Surface Area 225×1708mm Polyacrylonitrile Membrane

Подробная информация о продукте:

Место происхождения:	КИТАЙ
Фирменное наименование:	SINOMEMB
Сертификация:	NSF
Номер модели:	SNU-HI-1-H60

Оплата и доставка Условия:

Количество мин заказа:	5
Упаковывая детали:	Стандартная экспортная упаковка

контакт

High Toughness PES MBR Membrane 46m2 Surface Area 225×1708mm Polyacrylonitrile Membrane

описание

Основные компоненты:	MBR	Название продукта:	Ультрафильтрационная мембрана с полым волокном, система ультрафильтрационной системы, Мембранный мод
Размер пор:	Индивидуальный., от 1 мкм до 0,05 мкм, 0,01 микрона, 1,0 мкм, 0,2 мкм	Использование:	Очистка сточных вод, жидкий фильтр, удаление бактерий, очистка
Модуль:	ВНУТРЕННАЯ	Номинальный размер поры:	0,01 мкм
Размер:	225 × 1708 мм	Мембранный материал:	Пес
Площадь:	46м2
Выделить:	High Toughness MBR Membrane , 46m2 MBR Membrane , 225×1708mm Polyacrylonitrile Membrane

Normal Operation and Maintenance for MBR Membrane Element Size SNU-HI-1-H60

SNU-HM Hollow Fiber Submerged Curtain UF

The SNU-HM type hollow fiber submerged curtain UF utilizes special patented spinning technology with reinforced lining, combining all advantages of PVDF material membrane filaments with enhanced strength and toughness. This innovation addresses traditional PVDF membrane weaknesses of low strength and fragility, making it ideal for high-intensity aeration environments in MBR processes. With design flux optimized for different water qualities, its online cleaning cycle typically ranges between 7 to 17 days.

Membrane Element Specifications and Performance

Model	SNU-HM-Ⅰ	SNU-HM-Ⅱ
Specifications (mm)	630150036	630200036
Membrane diameter (mm)	1.5/2.6	0.8/1.4
Effective membrane area (㎡)	15	20
Filtration precision (μm)	0.05
Membrane material	Modified PVDF (polyvinylidene fluoride) and PET (polyester) support tubes
Connecting pipe specification	Φ32
Water collection method	Water catchment at both ends
Filter method	Submerged Suction Filtration
PH value	2-12
Temperature (°C)	10-45
Oil content (ppm)	<3
Transmembrane pressure TMP (Mpa)	0.02-0.05
Backwash pressure (Mpa)	0.1
Aeration rate (m³/h)	Air-water ratio 15:1-20:1
Backwash water flux (L/㎡·h)	25-50	25-36
Collecting pipe center distance (mm)	1500
Sludge concentration (ppm)	4000-12000	3000-10000
Design flux (L/㎡·h)	15-25	12-18
Product water quality	Turbidity≤0.2NTU, SDI≤3
Service life	≥3 years under standard conditions

Operation Guide

During UF system operation, avoid sudden pressure changes during startup, shutdown, or maintenance to prevent membrane damage. The product has been pre-treated with anti-corrosion and membrane wire protection. For initial operation, set water production rate to 50% of design capacity and discharge initial production.

Product Usage Tips

Proper system startup and maintenance are crucial for long-term performance. Verify all valves, instruments, pre-treatment equipment, and power systems meet design specifications before operation. Refer to technical manuals for system testing and debugging procedures.

Disclaimer: Failure to follow specified operating limits voids warranty. For inactive systems, inject protective liquid into membrane modules to prevent microbial growth and increased maintenance costs.

UF Specifications and Models

Model	Membrane Material	Operation Mode	Membrane Element Size (mm)	Effective Membrane Area (㎡)	Nominal Filter Pore Size (μm)
SNU-HI-1-H60	PES	inside-out	Φ225*1708	46	0.01

Note: Custom element models (membrane performance, appearance size) available based on order quantity.

тег:

Контактное лицо: Mr. Gary Gao

Телефон: +8618610069839

Другие продукты